Mini ZVS High Frequency Induction Heating Machine for Tesla High Voltage Generator Coil Module
Store Name: Vector Trading Company
Rating: 0.0 / 5.0
Spesification
Description
Different type: A:Assembly kit, heating coil and high pressure pack. B:Assembly kit, heating coil
This is a mini ZVS suite. The kit is very compact. It can\'t be powered by ordinary battery. It is recommended to use high-power switching power supply. The power supply from 5 to 12V can\'t be less than 5A!!! Pay attention to the power supply with high power, the power is sufficient, the working voltage is less than 5V and the current is less than 5A.
The operating voltage should not exceed 12V or lower than 5V. It only refers to the voltage in the circuit working, not the output voltage of the power supply. More than 12V or less than 5V power supply, the circuit is easy to problem seller is not responsible!
\\
\\
12V power supply pushes high voltage package, power 60W, MOS tube is not hot, no auxiliary heat dissipation. If you take induction heating, please do not work for a long time, after all, the power is limited, induction heating primary coil heating is larger, pay attention to heat dissipation.
\\
\\
\\
\\
\\
\\
Confirm that all the components are welded without error. The power line is positive and negative. After the load is loaded (the heating coil, the high pressure package), the power is reconnected. No power! No-load electricity is easy to damage!The 2 MOS tubes are easy to pass at the same time, and then heat and burn!
\\
\\
Maximum power 120W (12V induction heating)
\\
\\
\\
\\
The use of battery and battery power must ensure that the voltage at work is above 4.5V.Can not ensure that the working voltage has been more than 4.5V, do not use battery, battery power supply!Do not use dry battery power supply!
\\
\\
\\
\\
Heating coilThe width of the heated object is as much as 1/3~1/2 between the inner diameter of the coil, and the maximum does not exceed the 2/3!
\\
\\
The diameter of the heated object is controlled within 20mm as far as possible. Too much heating will be more difficult to heat to red, after all, the power is limited.
When the heating is induced, the power is cooled for 5 minutes. Because of the larger current in the induction heating, the heat of the coil is also larger.When heated, part of the heat generated by the heated object is passed to the heating coil, and the temperature of the heating coil will be high for a long time.. If the heating coil is connected to the terminal, the plastic part of the terminal will be melted away!
\\
\\
\\
\\
Buyers praise
The kit circuit board adopts FR-4 military level A material plate, plate tolerance and some parameters stability. A material is very strong, which is a good price relative to some other materials. \\
1. tin plating soldering plate is strong, can withstand repeated dismandling, not easy to fall off;
\\
\\
2.1.6mm plate thickness is not easy to occur self bending (refers to the bending caused by non human conditions), poor plate will change with time and environment. \\
\\
\\
The 3. impedance is more stable and reliable.
\\
\\
\\ \\
\\
\\
\\
Kit of parts, with heating coil, coil winding yourself
\\
\\
\\
\\
\\
\\
Welded finished product effect diagram
\\
\\
\\
\\
\\
\\
\\
\\
\\
\\
\\
\\
\\
\\
The induction heating is equipped with a simple heating coil. A coil of copper wire needs to be wound around itself. Attention should be paid to heat dissipation when heating. The heating coil made of hollow copper tube can achieve better cooling effect.
\\
\\
\\
\\
Test effect diagram:Because it\'s a mini type, the power is limited, it can simply heat a small object and can\'t melt the metal.
\\
\\
\\
\\
Refer to the professional handheld high frequency induction heater, the price is not very expensive!
\\
\\
\\
\\
\\
\\
Induction heating can also be applied to metal smelting
\\
\\
\\
\\
\\
\\
Drive high pressure package to produce high pressure. Please pay attention to safety
\\
\\
\\
\\
\\
\\
\'
Package Detail
- Unit Type:piece
- Package Weight:0.5kg (1.10lb.)
- Package Size:10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)
0 comments:
Post a Comment