Thursday, September 26, 2019

Easylink M-mini WiFi Module Development Board AR9331 Linux

Easylink M-mini WiFi Module Development Board AR9331 Linux

Easylink M-mini WiFi Module Development Board AR9331 Linux


Store Name: Vector Trading Company

Rating: / 5.0

Get it Now

Spesification

  • Type: Air Conditioner Parts

  • Description

    modname=ckeditor
    Explain:

    M-mini shop following Elink EL-M150, another AR9331 module. In addition to ultra-low power consumption like M150, M-mini has smaller size and pin-in connection. On board PCB antenna.

    Characteristic:

    Model: Elink M-mini

    System:Default openwrt

    CPU: AR9331 400MHZ MIPS 24kkernel

    RAM: 512Mbit(64MByte) DDR2 400MHZ

    Flash:32Mbit (4MByte) /64Mbit (8MByte default) /128Mbit (16MByte)Optional

    Wireless speed: 150Mbps

    currencyGPIO: 8(excluding)TX,RX)

    SPI: 1(multiplexing)

    I2S: 1(multiplexing)

    JTAG: 1(multiplexing)

    USB: Usb 2.0 masterInterface supportusb hubextend

    Debug:Serial port debug interface (TTL)

    Power supply: 3.3VPower supply voltage.

    Power waste: 0.36W

    Wired network: 1individual100Mnetwork interface

    Antenna: ipxThe pad can be directly welded to the antenna or IPX holder.

    Product size: 21.8 * 41.5MM

    Firmware:Fully compatible with WR703 openwrt, reset switch / system LED is compatible with 703.

     

    Standard configuration isFlash:8MByte(64Mbit/RAM:64MByte(512Mbit) DDR2

    Ultra small volume: unit mm

     

     

    Product recommendation application:

     

    1. Wireless network hard disk
    2. Mobile power +AP
    3. Mobile 3G+AP
    4. Wireless environment detection
    5. Remote video surveillance
    6. Wireless video surveillance
    7. Remote control switch
    8. Wireless remote control switch
    9. Internet Radio
    10. IPcam

    aboutInformation provided:

    M-mini module specification,

    OpenWRT basic function instructions,

    Floor plan

    The M-mini model based on OpenWRT branch attitude_adjustment supports Patch.

    Introduction to compiling OpenWRT

    OpenWRT system is open source, direct git clone official source code, you can compile the firmware of this module. If you use AA version firmware, please contact us to provide AA version firmware patch. We can provide open WRT source compression package with M-mini Patch.

    To provide a good support, please purchase the user input group of our store module.Please provide Taobao ID and order number when applying, otherwise we will not pass.We will takeuboot,firmwareUpdate files to group sharing.

    Note:

    1. the development board is the development board of the module, and does not provide chip level technical support.

     

    = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = = =

     

    Be careful:M-mini has been upgraded to V2.0 version. The original version without antenna is no longer available. If batch needs, please contact the seller.

    The original V1 version of the picture:

    The V2 version is being sold:

     

    V2 version M-mini is fully compatible with V1 version, and on the basis of V1 version, some bugs are corrected to enhance the stability of the module.

    At the same time, the onboard antenna is added, so that users do not need to consider what kind of antenna they are equipped with.

     

    Uboot starts log:

     

     



    Package Detail

    • Unit Type:piece
    • Package Weight:0.5kg (1.10lb.)
    • Package Size:10cm x 10cm x 10cm (3.94in x 3.94in x 3.94in)


    Get it Now

    0 comments:

    Post a Comment