Feature Product
- 1. Specifications: 1.5P air conditioning bracket, thickness 1.6mm, size 430 * 430 * 330mm. 2P air conditioning bracket, thickness 1.8mm, size 500*500*390mm. 3P air conditioning bracket, thickness 2.0mm, size 560*500*590mm.
- 2. Material: Made of high quality stainless steel, durable, waterproof and rustproof, thickness is about 1.6mm/1.8mm/2.0mm, bearing capacity: 280/330/380kg. Suitable for outdoor condensation and outdoor heat pump devices of various brands of air conditioning split systems.
- 3. Wall-mounted air-conditioning bracket: The air-conditioning frame is assembled with 8*80mm expansion screws. The three-point spiral design and the rivet assembly make the installation easier, the connection is safer, the finer production, firm and stable.
- 4. Detail design: Small rounded corners made by one stamping, no scratches, safer installation. Air-conditioning bracket anti-shedding bar design, safety factor upgrade, use more assured. Retractable design, small size, easy to carry.
- 5. Outdoor condenser protection: Raise the compressor unit above the ground to prevent dust, debris, rain, snow, flood, vandalism, etc.
Description
Name: Universal air conditioner outer bracket
Model: 1.5P/2P/3P
Color: stainless steel
Thickness: 1.6mm/1.8mm/2.0mm
Screw size: 8*80mm
Weight: (1.3/2.2/2.6) kg
Load capacity up to: 280/330/380kg
Installation Notes
1. Use the M12 drill bit to select the punching position on the wall and make a hole. (The depth of the hole is the same as the length of the metal expansion tube)
2. Knock the expansion screw into the hole (do not remove the nut to prevent the hole from being too deep, and the bolt is dropped into the hole.)
3. After tightening the nut for 5-6 turns, feel that the expansion bolt is tight and not loose, then unscrew the nut. Secure the bracket to the bolt and install the outer washer or spring washer handle to tighten the nut.
Installation Precautions: For safety reasons, it is recommended to install the bracket on a wall that is slightly tilted back.
note:
1. The pictures are taken in kind. Due to the influence of light, display and other factors, there will be some difference between the real thing and the photo. Please refer to the actual product.
2. There may be slight differences due to different measurement methods. Please refer to the actual product for the specific size. The dimensional error is about 1-3 cm.
3. The goods arrive at your side for about 8-22 days. After receiving the goods, please check them in time. If you have problems, you can contact us by email.
4. We only sell air-conditioning mounting brackets and do not sell other items.
0 comments:
Post a Comment